SD 350 V ½ HP (400w) Submersible Pump is built with an Integrated, Internal Vertical Float. The 350 V works in confined spaces and keeps working no matter how debris filled the water gets. Portable and Lightweight but designed for tough environments. The SD 350 V can suck water out of the most debris filled environment. 50 Gallons Per Minute at 5’ lift and maximum Head of 34’. It comes with 25’ power cord, runs off 115-Volts, draws 7.5 Amps, and has 1 ½” NPT male discharge flange to accommodate lay flat hoses. Debris in water will not interfere with the operation of the unique integrated vertical float inside the non-clogging cage. The SD 350 V is perfect for construction sites, emergency flood water drainage, flooded basements, debris filled pools, and any commercial or general de-watering jobs. This pump will get the job done.
- Portable and Lightweight at only 18.8 lbs. yet rugged enough for the toughest jobs
- Patented stainless-steel cage with ¼” openings that surrounds the pump preventing rocks, rope, and other debris from clogging the cast iron impeller, rendering trouble-free, long lasting operation
- Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels
- Pumps up to 3000 gallons per hour at 5 ft. lift, emptying sump pit in seconds
- Integrated vertical float allows for auto on operation at 6” of water, auto off operation at 2” of water.
- Pump motor is housed in watertight casing, conforms to class F insulation; 115-Volts motor, draws only 7.5 Amps. Motor has a built-in thermal protector which protects against overheating.
- Perfect for commercial and industrial site dewatering, construction sites, civil engineering projects, basements, parking lots, residential, removing residue water.
- 25 ft. power cord, 1 ½” male discharge flange
- 18.8 lbs. and an easy-to-grip handle makes this pump easily portable
Specifications
Motor Output HP/Watts |
0.50 HP/400 Watts, 60Hz |
||
Voltage |
115 |
||
Amps: Running |
7.5 |
||
Phase |
Single |
||
Power Cord Length |
33 ft |
||
Discharge Connection Diam. |
1 1/2" NPT |
||
Max. Solids Diam. |
1/4 inch |
||
Max. Temp. |
104F / 40C |
||
Impeller Material |
Cast Iron |
||
Float |
Integrated Vertical Auto On/Off |
||
On/Off Height |
On 6" - Off 2" |
||
Motor Protection |
Thermal Overload Built-in |
||
Internal Lubricant |
Turbine Oil VG32 (150 CC) |
||
Weight |
18.8 lbs |
||
Product Dimensions |
10"Diam x 12.5"H / 25.4cm x 31.75cm |
Discharge Flow Chart
Head | GPM | GPH |
34' | 0 | 0 |
30' | 12 | 720 |
25' | 24 | 1440 |
20' | 32 | 1920 |
15' | 38 | 2280 |
10' | 44 | 2640 |
5' | 50 | 3000 |