The Oil Sensor equipped SD 350 OS, ½ Hp (400Watt) submersible pump helps keep your project within environmental compliances. Clad in our patented 304 Stainless Steel non-clogging cage, it is designed to work with the attached Oil Sensor, The SD 350 OS is perfect for environments where a warning about oil contamination is crucial. Does not clog in debris-laden water situations. The SD 350 OS comes with a Tethered External Adjustable Float. The SD 350 OS works vertically or horizontally and keeps working no matter how debris-filled the water gets. 50 Gallons Per Minute at 5’ lift and a Head of 34’. It comes with 25’ power cord, runs off 115-Volts, draws only 7.3 Amps, and has 1 ½” NPT male discharge flange to accommodate lay flat hoses. Worried about your hydraulics in a flooded environment? Or need to keep an eye on your elevator shaft pit? The SD 350 OS will warn you the second it detects any oil contamination, saving you from fines and keeping the environment clean. And with our patented non-clogging cage, our pumps are ready for whatever you throw at them.
Specifications
Discharge Flow Chart
- All non-clogging, debris resistant operation
- Designed for environments where a warning about oil contamination is crucial
- Patented stainless-steel cage with ¼” openings that surrounds the pump preventing rocks, rope, and other debris from clogging the pump impeller, rendering trouble-free, long lasting operation
- External float can be adjusted to automatically turn the pump On and Off at various heights
- Pumps up to 3000 gallons per hour at 5’ lift, emptying a sump pit in seconds
- Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels
- Pump motor is housed in watertight casing, conforms to class F insulation; 115-Volts motor, draws 7.3 Amps. Motor has a built-in thermal protector which protects against overheating and extended dry run
- 25’ power cord, 1 ½” male discharge flange
- 38 lbs. and an easy-to-grip handle makes this pump easily portable
-
Perfect for Elevator Shaft Sump Pit, as per National Elevator Code: ANSI A17.1
Specifications
|
Motor Output HP/Watts |
0.50 HP/400 Watts, 60Hz |
||
|
Voltage |
115 |
||
|
Amps: Running |
7.3 |
||
|
Phase |
Single |
||
|
Power Cord Length |
25" ft |
||
|
Discharge Connection Diam. |
1 1/2" NPT |
||
|
Max. Solids Diam. |
1/4 inch |
||
|
Max. Temp. |
180F / 82C |
||
|
Impeller Material |
Engineered Polymer |
||
|
Float |
Tethered Float |
||
|
On/Off Height |
Adjustable |
||
|
Motor Protection |
Thermal Overload Built-in |
||
|
Internal Lubricant |
Turbine Oil VG32 (150 CC) |
||
|
Weight |
38lbs |
||
|
Product Dimensions |
10"Diam x 12.5"H / 25.4cm x 31.75cm |
||
Discharge Flow Chart
| Head | GPM | GPH |
| 34' | 0 | 0 |
| 30' | 12 | 720 |
| 25' | 24 | 1440 |
| 20' | 32 | 1920 |
| 15' | 38 | 2280 |
| 10' | 44 | 2640 |
| 5' | 50 | 3000 |